up to 2,100mm
Click to enlarge
Double Leaf Fire Door
A double leaf fire door for main fire exits, lobby access points and equipment passage where a single leaf is too narrow. Equal or unequal leaves up to 2,100mm wide, with an EN 1158 door coordinator ensuring correct closing sequence — rated to 60, 90 or 120 minutes.
| Width | up to 2,100mm |
| Rating | 60/90/120 min |
| Brand | Yadav Entrance Automation Pvt. Ltd. |
| Manufacturing | Made in India · ISO 9001 · CE |
Which Fire Rating Do You Need?
Fire rating specifies how long a door assembly can resist fire without structural failure, flame passage, or excessive heat transmission. NBC 2016 mandates specific ratings for each building use type.
Not sure which rating applies to your building? Our fire safety consultants will advise free of charge →
Every Component Tested. Every Install Certified.
Fire doors are life safety equipment. Our engineering choices reflect that — no cost cutting on hardware, no uncertified substitutions, no shortcuts on installation.
Tested Fire Ratings — Not Self-Declared
Every fire rating we quote is backed by a third-party test certificate from a NABL-accredited laboratory (CBRI Roorkee, CPRI, or equivalent). We provide the actual test report — not a datasheet claim. Copies available on request before order placement.
EN 1125 Panic Bar — Certified Egress
Emergency exit doors carry CE-marked EN 1125 panic bars — the European standard for single-action emergency egress. Push bar activates in one motion, regardless of direction. Latchbolt retracts fully with minimal 150N force. Fire exit signage included.
Four-Sided Smoke Sealing — EN 1634 Compliant
Smoke is responsible for 70%+ of fire deaths. Our intumescent strip expands at 150°C to seal the gap between door and frame. Supplemented by brush seal on the hinge side for positive pressure resistance. Full perimeter coverage — no gaps.
EN 1154 Self-Closing — No Manual Propping
All fire doors are fitted with EN 1154-certified hydraulic overhead closers. Door closes and latches from any open position above 5°. Adjustable closing force (Sizes 2–7). Hold-open electromagnet available — releases on fire alarm activation.
Acoustic Performance — Up to 42 Rw dB
Our soundproof fire door variant combines fire resistance with acoustic attenuation up to 42 Rw dB — sufficient for cinema walls, recording studios, hospital operating theatres, and server room environments. Fire and acoustic rated in a single assembly.
Steel Sub-Frame with Fire-Rated Grout
Our installation method uses a fully welded steel sub-frame anchored with M12 anchor bolts at 300mm centres. Frame cavity is filled with fire-rated intumescent grout. This prevents fire from bypassing the door through the frame-wall junction — a common failure mode.
Where Fire Rated Doors Are Mandatory
NBC 2016 and insurance requirements mandate fire rated doors in specific locations within buildings. Our engineers can advise on the correct rating and specification for each location in your facility.
120-minute rated doors with intumescent seals. Essential for FM Global insurance compliance. Integration with suppression system and door hold-opens standard.
90-minute corridor doors with hospital-grade hardware. Hold-open electromagnets release on fire alarm. Smooth operation for gurney and wheelchair passage.
180-minute rated doors for hazardous material storage, solvent rooms, and chemical process areas. GI or SS304 finish for chemical resistance.
90-minute rated stairwell, plant room, and kitchen doors. Concealed closer for aesthetic finish. Master key compatible cylinder for hotel management.
60–90-minute fire exit doors at every stairwell and service corridor. EN 1125 panic bars mandatory for escape routes. Exit signage and emergency lighting integration.
DGCA-compliant fire doors for fuel handling areas, electrical rooms, and cargo bays. SS304 hardware for coastal corrosion resistance.
120-minute fire separation doors between storage compartments for bonded warehouses, flammable goods stores, and cross-docking facilities.
180-minute fire rated doors for transformer bays, cable galleries, and switchgear rooms. Meets IEC 60079 requirements for electrical hazardous area classification.
Double Leaf Fire Door — Technical Specifications
Complete engineering data for our fire rated door range. Specifications cover the standard steel fire door with panic bar hardware. Aluminium and acoustic variants differ in door leaf construction.
| Parameter | Specification |
|---|---|
| Fire Rating Options | 60 / 90 / 120 / 180 minutes — third-party tested per EN 1634 / IS 3614 |
| Door Leaf Material | GI sheet (24 gauge outer) / MS sheet with fire-rated core fill |
| Core Infill | Rockwool mineral wool (60/90/120 min) / Calcium silicate board (180 min) |
| Door Leaf Thickness | 45mm (60 min) / 50mm (90 min) / 60mm (120/180 min) |
| Frame Type | Steel sub-frame (2mm pressed steel) with fire-rated intumescent grout fill |
| Frame Fixing | M12 anchor bolts at 300mm centres; fully welded mitre joints |
| Panic Bar Hardware | EN 1125 certified touch bar / push bar — opens with single downward push |
| Door Closer | EN 1154 certified overhead hydraulic closer — Size 2–7 adjustable |
| Lever Handle | EN 179 certified lever handle (non-panic doors) |
| Smoke Seal | Intumescent strip (expands at 150°C) + EPDM brush seal — all four edges |
| Hinge Type | 3 × EN 1935 Gr.14 CE-marked stainless steel hinges per leaf |
| Glazing Option | Fire-rated Georgian wired glass or ceramic glass (up to 30% of leaf area) |
| Maximum Single Leaf Size | 1,100mm wide × 2,400mm high |
| Maximum Double Leaf Size | 2,100mm wide × 2,400mm high (equal or unequal leaves) |
| Sidelight Option | Up to 500mm wide fixed sidelights with fire-rated glass available |
| Acoustic Rating (Soundproof Variant) | Up to 42 Rw dB (weighted sound reduction index) |
| Finish Options | Powder coat (standard) / hot-dip galvanized / SS304 cladding |
| Operating Temperature | -10°C to +50°C ambient (door hardware rated) |
| Standards | IS 3614, EN 1634-1, UL 10C (positive pressure), NBC 2016 |
| Hardware Standards | EN 1125 (panic), EN 1154 (closer), EN 179 (handle), EN 1935 (hinges) |
| Warranty | 5 years structural, lifetime door frame, 2 years hardware |
What the Double Leaf Fire Door is, and who it suits
The Double Leaf Fire Door is a type of fire rated doors used across warehouses, factories, cold stores and commercial buildings. It is built to order at our Neemrana plant, installed and commissioned by our own engineers, and supported afterwards with spares and maintenance. See the full Fire Rated Doors range, the sectors we serve, or every product line.
- Warehouse and distribution-centre openings
- Factory and production-floor entrances
- Cold stores and temperature-controlled rooms
- Clean rooms and pharmaceutical areas
- Loading bays and dispatch docks
- Commercial building entrances
- Clear opening width and height (the daylight opening, not the wall opening)
- Lintel / headroom above the opening
- Side-room free each side for guides and motor
- Power available at the opening — 230V single-phase or 415V three-phase, 50 Hz
- Approximate cycles per day
- Any fire-rating, temperature or hygiene requirement
Send these with your enquiry and an engineer replies with a drawing and a written delivery date, rather than a generic response. Talk to an engineer →
Reference: manufacturing certified to ISO 9001, applicable products CE marked (European Commission), built to Indian Standards published by the Bureau of Indian Standards.
Double Leaf Fire Door — Engineered & Supported Across India
The Double Leaf Fire Door is manufactured and supported entirely within India. As an Indian manufacturer of fire rated doors, Yadav Entrance Automation Pvt. Ltd. engineers each unit for the realities of Indian warehouses, factories, cold stores and commercial buildings — variable power supply, high ambient temperatures, dust and monsoon humidity — and backs it with in-house manufacturing, pan-India installation and after-sales maintenance.
- Made in IndiaManufactured in-house at our Indian facilities — qualifies as a Make-in-India product for government and PSU procurement.
- Standard Indian MainsPowered models run on 230V single-phase or 415V three-phase at 50 Hz; manual / non-powered options where applicable.
- Established Since 2011Part of a track record of 500+ installations across 50+ Indian cities.
- Pan-India Install & AMCInstallation, genuine spare parts and Annual Maintenance Contracts (AMC) available nationwide.
- GST-Compliant SupplyGST invoicing for Indian businesses, with documentation suited to enterprise and PSU procurement.
- Built for Indian ConditionsSpecified for the heat, dust and monsoon humidity common on Indian industrial sites.
Strong on-ground presence in the NCR & Haryana industrial corridor — Gurugram, Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi — and the Gujarat industrial belt — Ahmedabad, Sanand, Vithlapur and Mandal. Installation and service available across India. See all areas we serve →
Fire Door Variant Comparison
| Feature | Fire Exit Door ⭐ Most Specified | Double Door + Panic Bar | Soundproof Acoustic | PUF Insulated Door | |
|---|---|---|---|---|---|
| Fire Rating | 60 / 90 / 120 / 180 min | 60 / 90 / 120 min | 60 / 90 min | 60 / 90 / 120 min | |
| Door Leaf Construction | GI + Rockwool / Cal-Silicate | GI + Rockwool | Steel + Acoustic mineral wool | GI + PUF (polyurethane foam) | — |
| Leaf Thickness | 45 / 50 / 60mm | 50 / 60mm | 60 / 70mm | 45 / 50mm | — |
| Emergency Egress Hardware | EN 1125 panic bar (standard) | EN 1125 panic bar (both leafs) | EN 179 lever handle | EN 179 lever handle | — |
| Acoustic Rating | ~28 Rw dB (inherent) | ~28–32 Rw dB | Up to 42 Rw dB | ~30 Rw dB | — |
| Thermal Insulation | Moderate | Moderate | Moderate | Excellent (U-value ~0.9) | — |
| Best For | Stairwells, service corridors, server rooms | Main fire exits, lobby access points | Hospitals, studios, data centers | Cold rooms, blast freezer entry | — |
Certifications That Matter for Compliance
For fire rated products, certification is not a marketing claim — it is a legal requirement. Every certification we carry has a corresponding third-party test report available for inspection.
3614
Indian Standard for fire check doors — the domestic standard referenced by NBC 2016 and fire NOC conditions. Mandatory for all fire doors in regulated Indian buildings.
1634
European standard for fire resistance of door and shutter assemblies. Accepted by IGBC, LEED India, and multinational occupiers who mandate European testing standards.
10C
Underwriters Laboratories positive pressure fire test. Required by FM Global, Aon, and US insurance underwriters for data centers, warehouses, and industrial facilities.
2016
National Building Code Part 4 (Fire and Life Safety) compliance. Required for building plan approval, fire NOC, and occupancy certificate in all Indian states.
9001
Quality management certification covering the design, manufacturing, hardware specification, installation, and commissioning processes for all fire rated door products.
Double Leaf Fire Door — Frequently Asked Questions
Is the Double Leaf Fire Door manufactured in India?
Which regions do you install and service in?
What power supply does the Double Leaf Fire Door need?
Do you provide installation, spares and AMC?
How do I get a quote for the Double Leaf Fire Door?
Is the Double Leaf Fire Door certified?
Every Fire Door Quote Includes Test Certificates
When you request a fire door quote from Yadav Entrance Automation, you receive a specification document listing the exact fire rating, test certificate references, and hardware standards — ready to submit to your fire consultant or building plan approvals office.
Third-Party Test Certificates Provided
We provide CBRI / NABL-accredited test report references for every fire rating we supply. No self-declarations.
Fire NOC Documentation Support
Our compliance team assists with fire NOC submission documentation, drawing packages, and technical data sheets required by local fire departments.
Annual Inspection & AMC Available
Fire doors require annual maintenance inspection per NBC 2016. Our AMC includes closer calibration, seal inspection, and a compliance certificate.