Clear spans up to 90m
Click to enlarge
Steel Fabrication & PEB Structures
Yadav Entrance Automation delivers turnkey steel fabrication and peb structure works — pre-engineered buildings with clear spans up to 90m, industrial shed structures, MS gate fabrication, canopy structures, safety railings and machine platforms. Every steel structure is designed to IS 800 / IS 811 / MBMA, fabricated from IS 2062 steel and finished hot-dip galvanized or epoxy-painted for decades of service in Indian industrial conditions.
| Clear Span (PEB) | 12m – 90m column-free; multi-bay on request |
| Primary Framing | Built-up tapered I-sections; IS 2062 plate |
| Secondary Framing | Z & C purlins (cold-formed), 1.5–3.0mm |
| Finish | Hot-dip galvanized or epoxy-painted (PU top-coat) |
PEB Structure & Steel Fabrication Built for Indian Industry
Six engineering advantages that make Yadav Entrance Automation the preferred partner for pre engineered building, industrial shed and steel structure fabrication across India.
Clear Spans up to 90m
Our PEB structure designs deliver column-free clear spans up to 90m using built-up tapered I-section frames — maximising usable floor area for warehouses, factories and logistics parks. Multi-bay and multi-gable configurations engineered to your layout.
Designed to IS 800 / IS 811 / MBMA
Every steel structure is analysed and detailed to IS 800 (general steel construction), IS 811 (cold-formed sections) and MBMA practice for wind and seismic loads. Stamped structural drawings and load calculations supplied for statutory approval.
Primary & Secondary Framing In-House
We fabricate built-up I-section rafters and columns, plus cold-formed Z & C purlins, side runners and bracing — all in-house on calibrated welding lines. Single-source accountability from raw IS 2062 plate to erected frame.
Industrial Sheds & Crane Gantry
Industrial shed structures with built-in crane gantry options — EOT and HOT crane runways integrated into the PEB frame at design stage. Standing-seam and trapezoidal roofing sheets with skylights and turbo-ventilators to suit.
Galvanized or Epoxy-Painted Finish
Choose hot-dip galvanizing for corrosive and coastal environments, or a two-coat epoxy primer plus PU top-coat for inland plants. MS gates, safety railings and platforms all finished to the same durable standard.
Pan-India Fabrication & Erection
Our project teams fabricate, transport and erect steel structures nationwide, backed by Annual Maintenance Contracts with a 4-hour emergency response SLA. One vendor for design, fabrication, erection, spares and service.
Steel Fabrication & Structure Works We Manufacture
Six steel structure fabrication scopes covering every industrial requirement — from full pre engineered building to MS gate fabrication. Each is built to order; tell us your span, load and site and we engineer to match.
Entrance Works
MS Gate Fabrication
Heavy-duty MS gate fabrication in IS 2062 steel — sliding, swing and cantilever industrial gates for factory and warehouse entrances. Fully welded frames, infill mesh or sheet, and finishes matched to your boundary. Motorisation and access control integrated on request.
View details
Most Popular
Industrial Shed Structure
Complete industrial shed structures combining a steel frame with trapezoidal or standing-seam roofing. Crane gantry runways, skylights and turbo-ventilators integrated at design stage. The fast-track route to a weather-tight production or storage building.
View details
Shade & Cover
Canopy Structure
Tensile and steel canopy structures for loading bays, walkways, parking and entrance porticos. Cantilevered or column-supported steel frames with sheet, polycarbonate or PVDF fabric covers — engineered for wind uplift and clean rainwater run-off.
View details
Pre Engineered Building
PEB Structure
Full pre-engineered building (PEB structure) supply — built-up I-section primary framing, Z & C purlin secondary framing, bracing, roofing and cladding. Clear spans up to 90m, designed to IS 800 / IS 811 / MBMA for wind and seismic loads, delivered as a turnkey envelope.
View details
Factory Safety
Safety Railings
GI and MS safety railings, handrails and toe-guards fabricated to factory safety norms for staircases, mezzanines, platforms and pits. Modular pipe or box-section systems, hot-dip galvanized for long maintenance-free life on the shop floor.
View details
Access & Foundation
Machine Platforms
Steel machine foundations and access platforms with chequer-plate decks, stairs and railings — engineered to support vibrating equipment, tanks and elevated process lines. Bolt-down or grouted bases designed to your machine load and footprint.
View detailsWhere Our Steel Structures Are Used
Yadav Entrance Automation PEB structures and steel fabrication are deployed across India's warehousing, manufacturing, automotive and infrastructure sectors — each with specific span, load and finish requirements our engineers address at design stage.
Large clear-span PEB warehouses and industrial sheds for distribution centres, cold stores and logistics parks
Factory sheds with crane gantry, machine platforms and process-line foundations for heavy production plants
Tier-1 plant sheds, MS gate fabrication and equipment platforms for OEM and ancillary facilities
Canopy structures, dispatch sheds and PEB godowns supporting high-throughput packaging and storage
Bus depots, parking canopies, toll plazas and walkway structures fabricated to public-works standards
Insulated PEB shells and platforms for refrigerated warehouses and temperature-controlled processing
GMP-area sheds, mezzanine steelwork and safety railings for clean, regulated production environments
Machine platforms, equipment supports and structural steelwork for power plants and solar mounting yards
Full PEB Structure & Steel Fabrication Specifications
Complete engineering data for the Yadav Entrance Automation steel fabrication and PEB structure range. All works are built to order — span, framing and finish are configured to your project and statutory loads.
| Parameter | Specification |
|---|---|
| Clear Span (PEB) | 12m / 24m / 36m / 60m / up to 90m column-free (multi-bay on request) |
| Primary Framing | Built-up tapered I-sections from IS 2062 plate; welded plate girders |
| Secondary Framing | Cold-formed Z & C purlins (IS 811), 1.5–3.0mm; eave struts & side runners |
| Bracing & Connections | Rod / angle bracing; HSFG bolted & site-welded connections |
| Roofing & Cladding | Standing-seam or trapezoidal sheet (0.5–0.8mm); skylight & insulation options |
| Crane Provision | EOT / HOT crane gantry runway integrated into frame (industrial shed) |
| MS Gate & Railing Steel | IS 2062 Grade B sections; pipe / box / angle for railings & toe-guards |
| Machine Platform Deck | Anti-skid MS chequer plate (6–8mm) with stairs & handrails |
| Design Codes | IS 800, IS 811, IS 875 (loads), MBMA Metal Building practice |
| Surface Finish | Hot-dip galvanized OR 2-coat epoxy primer + PU top-coat |
| Erection | Site survey, foundation bolt template, transport & erection by own teams |
| Certifications | ISO 9001:2015; IS 2062 mill test certificates; weld inspection reports |
| Warranty | 2 years on coating / sheeting, 5 years structural (subject to environment) |
Steel Structure & Specification Comparison
| Structure Type | Typical Span / Scope | Industrial Shed ⭐ Most Popular | Material / Grade | Finish | Lead Time |
|---|---|---|---|---|---|
| MS Gate Fabrication | Per gate / per sq.ft | Sliding / swing | IS 2062 sections | Galv. / epoxy | 2–3 weeks |
| Safety Railings | Per running metre | GI handrail + toe-guard | GI pipe / box | Hot-dip galv. | 2–3 weeks |
| Canopy Structure | Per sq.ft covered | Steel / tensile | IS 2062 + sheet | Epoxy / PVDF | 3–5 weeks |
| Industrial Shed | Per sq.ft built-up | Frame + roofing | IS 2062 + Z/C purlin | Galv. / epoxy | 6–10 weeks |
| PEB Structure | Clear span up to 90m | Primary + secondary | Built-up I-section | Galv. / epoxy | 8–14 weeks |
Certified to International Standards
Our steel fabrication and PEB structure works carry the certifications required by India's largest industrial developers, multinational manufacturers and government procurement bodies.
9001
Quality management certification covering design, fabrication, erection and after-sales service of all steel structures and PEB works.
800
PEB and steel structures analysed and detailed to IS 800 general steel construction code with stamped load calculations.
2062
Structural steel to Indian Standard IS 2062 Grade B for frames, gates and platforms — supplied with mill test certificates.
2016
Fabrication and erection methodology compliant with the National Building Code of India 2016 for industrial occupancy.
in India
100% fabricated at our registered Indian facilities — qualifies for government procurement preference and PSU tenders.
PEB Structure Design + Quote in 24 Hours
No generic quotes, no run-around.
In-House Fabrication
Every steel structure fabricated under ISO 9001 quality control — no outsourced jobwork, no middlemen.
Free Site Survey & Design
Our engineers survey your site and supply stamped structural drawings and a foundation bolt template — at no charge.
Erection & AMC Nationwide
Own erection teams and Annual Maintenance Contracts covering all steel structures with a 4-hour emergency response SLA.
Choosing steel fabrication: what actually decides the specification
A peb structure is structural steelwork made to drawing — sheds, gates, railings, canopies and platforms. The right one is decided by the opening and how it is used, not by the catalogue. These are the things worth settling before anyone quotes.
What to measure
- Clear opening width and height — the daylight opening the vehicle or person passes through, not the hole in the wall.
- Headroom above the opening — decides which products are possible at all.
- Side-room, both sides — guides, tracks and motors live here, and it is rarely equal on both sides.
- Power at the position — 230V single-phase or 415V three-phase, 50 Hz.
- Cycles per shift — the most under-specified figure on a typical enquiry.
- Environment — temperature, dust, washdown, coastal air or a hygiene requirement.
The full steel fabrication range
- MS Gate Fabrication — Heavy-duty MS gate fabrication in IS 2062 steel — sliding, swing and cantilever industrial gates for factory and warehouse entrances.
- Industrial Shed Structure — Complete industrial shed structures combining a steel frame with trapezoidal or standing-seam roofing.
- Canopy Structure — Tensile and steel canopy structures for loading bays, walkways, parking and entrance porticos.
- PEB Structure — Full pre-engineered building (PEB structure) supply — built-up I-section primary framing, Z & C purlin secondary framing, bracing, roofing and cladding.
- Safety Railings — GI and MS safety railings, handrails and toe-guards fabricated to factory safety norms for staircases, mezzanines, platforms and pits.
- Machine Platforms — Steel machine foundations and access platforms with chequer-plate decks, stairs and railings — engineered to support vibrating equipment, tanks and elevated process lines.
Where steel fabrication are typically installed
We build steel fabrication for manufacturing plants, warehouses, infrastructure projects and plant perimeters.
Sectors we supply
- Warehousing and logistics — distribution centres, 3PL facilities and dispatch docks.
- Cold chain — cold stores, freezer rooms and temperature-controlled dispatch.
- Automotive and engineering — component plants, press shops and assembly lines.
- Pharmaceutical and clean manufacturing — controlled and hygiene-critical areas.
- Infrastructure and construction — plant perimeters, site structures and civil scopes.
- Commercial and institutional — offices, campuses, hospitals and parking facilities.
What drives the cost
We quote per project rather than publishing prices. The figure moves with the span and covered area, the material grade, the finish and site access for erection. Send the measurements above and an engineer returns a drawing and a written quotation. Talk to an engineer →
Standards, materials and what we certify
- ISO 9001 — our quality management system is certified to it.
- CE marking on applicable products — a manufacturer's declaration of conformity, not a quality grade.
- IS 2062 structural steel for fabrication, gates and structures.
- IS 6248 for metal rolling shutters.
- EN 1634 as the reference for fire-resistance testing.
- Make in India and GST registered — relevant to government and PSU procurement.
- 230V single-phase / 415V three-phase, 50 Hz — standard Indian industrial mains.
Reference sources: European Commission, CE marking · Bureau of Indian Standards
From enquiry to handover
- Enquiry. Opening sizes, site location and application. An engineer picks it up.
- Site survey. We measure the clear opening, headroom, side-room and power position.
- Drawing and quotation. Equipment, safety schedule, electrical requirement and a written delivery date.
- Manufacture at Neemrana. Built to the approved drawing and the measured opening.
- Installation and commissioning. Fitted and tested by our own team through full travel with safety devices live.
- Handover, spares and AMC. Operating instructions on site, then service through the nearest team.
Explore the full product range, the sectors we serve, our delivered installations, or the areas we cover.
Steel Fabrication — frequently asked questions
Who manufactures steel fabrication in India?
Yadav Entrance Automation Pvt. Ltd. manufactures steel fabrication in India, at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor. We have been building entrance automation equipment since 2011, with more than 500 installations across over 50 cities. Equipment is made to the measured opening rather than to a catalogue size, then installed and commissioned by our own engineers.
What is a peb structure?
A peb structure is structural steelwork made to drawing — sheds, gates, railings, canopies and platforms. It is specified against the opening it serves and the way that opening is used, so two openings of the same width can need different equipment. We build steel fabrication for manufacturing plants, warehouses, infrastructure projects and plant perimeters.
What does a peb structure cost?
We quote per project rather than publishing a price, because the figure moves with the span and covered area, the material grade, the finish and site access for erection. Send the opening dimensions, the site location and how the opening is used, and an engineer will come back with a drawing and a written quotation. That is faster than a list price that would need revising once the site is measured.
Do you supply steel fabrication near me?
We install and service across North and West India, with the plant at Neemrana and teams in Delhi NCR and Gujarat. Installations to date cover more than 50 cities, concentrated in the Delhi-Jaipur corridor, Haryana, Rajasthan and Gujarat. Tell us the site location with your enquiry and we will confirm coverage before quoting.
Can steel fabrication be motorised or automated?
Yes, where the product supports it. Motorised operation is specified against the weight being moved and the number of cycles per day, not simply added on. The drive, the control panel and the safety devices are listed on the technical drawing you approve before manufacture, so nothing about the automation is a surprise on site.
What power supply is needed?
Standard Indian industrial mains: 230V single-phase or 415V three-phase at 50 Hz. Which one applies depends on the product, the size of the opening and the duty cycle. The requirement is confirmed on the approved drawing so your electrical contractor can position the supply and isolator before delivery.
What measurements do you need to quote for steel fabrication?
Clear opening width and height first — the daylight opening, not the wall opening. Then the headroom above the opening and the free side-room each side. Add the power available at the position, how many openings, and roughly how often each is used in a shift. Those figures let an engineer rule out the wrong products before visiting.
Do you handle installation, or only supply?
We manufacture, install and commission with our own team, and we do not sub-contract installation of our own equipment. How well a unit is fitted to its opening decides how long it lasts, so it is not work we hand off. Handover includes operating instructions on site.
Do you provide service, spares and AMC?
Yes. We supply genuine spares and offer Annual Maintenance Contracts for the equipment we manufacture. On high-cycle equipment maintenance matters more than most buyers expect, because wear tracks cycles rather than calendar age. Tell us the site and the equipment and we will route it to the nearest service team.
Which standards and certifications apply?
Our manufacturing is certified to ISO 9001 and applicable products are CE marked. Structural steelwork commonly references IS 2062 and rolling shutters IS 6248, both published by the Bureau of Indian Standards; fire-resistance testing is commonly referenced to EN 1634. If your specification names a standard, send the clause with the enquiry so it is written into the drawing.
Can you make steel fabrication to a non-standard size?
Yes, and most industrial openings are non-standard. Equipment is built to the measured opening rather than to a catalogue size. We take the clear width, clear height, headroom and side-room on site, then confirm the achievable size on the drawing before manufacture begins.
How long does manufacture and delivery take?
It depends on the product and whether the opening is standard or bespoke, and it moves with material availability and the current order book. Rather than quote a general figure that may not hold, we confirm a delivery date in writing with the quotation.
Do you work with contractors, consultants and PSUs?
Yes. We supply end users directly and also work as a vendor to main contractors, PMCs and design consultants. We are GST registered and manufacture under Make in India, which matters for government and PSU procurement. For tendered work we can provide drawings, product data and the compliance documentation the specification calls for.
What safety devices are included?
For powered equipment, typically safety photocells across the opening, a safety edge where applicable, limit switches at both travel ends, and a manual release for use during a power cut. Vehicle equipment can add loop detectors. The exact schedule is listed on the drawing you approve, so check that rather than assuming a standard set.
How do I get a quote for steel fabrication?
Use the enquiry form on this page and the details reach our team directly, or call and send a WhatsApp message on +91 95492 20707, or email sales@yadaventranceautomation.com. If you already hold drawings or a specification, say so and an engineer will respond rather than a generic reply.