Up to 12m single / 20m+ telescopic
Click to enlarge
Automatic Sliding Gates & Operators
Yadav Entrance Automation is an automatic sliding gate manufacturer in India, building cantilever, telescopic, industrial and residential sliding gates that span up to 12m on a single leaf and 20m+ in telescopic configuration. Every automatic sliding gate runs on a heavy-duty rack-and-pinion drive with a 24V DC or 3-phase sliding gate motor rated from 600 kg to 1,800 kg+, soft start/stop, and safety photocells — engineered for factory, warehouse and residential entrances.
| Max Span | 12m single leaf / 20m+ telescopic (custom) |
| Motor Rating | 600 / 1,000 / 1,500 / 1,800 kg+ gate weight |
| Drive & Operator | Rack-and-pinion; 24V DC or 415V 3-phase |
| Infill / Finish | MS / SS / aluminium; powder-coated or galvanized |
Automatic Sliding Gates Built for Indian Industry
Six engineering advantages that make Yadav Entrance Automation automatic sliding gates the preferred choice for factories, warehouses, gated communities and residential entrances across India.
Spans Up to 12m / 20m+ Telescopic
Our sliding gate range covers every opening — from compact residential driveways to wide industrial entrances. A single leaf clears up to 12m, and a telescopic sliding gate splits into nested leaves to bridge 20m+ where back-run space is limited.
Fail-Safe Safety as Standard
Every automatic sliding gate ships with safety photocells that reverse on obstruction, loop detectors for vehicle presence, a flashing warning lamp and a manual release for power-failure operation — keeping people, vehicles and the gate motor protected.
Rack-and-Pinion Drive
A hardened rack-and-pinion drive paired with a sliding gate motor rated 600 kg to 1,800 kg+ delivers smooth, positive movement cycle after cycle. Soft start and soft stop reduce shock loading and extend gate and operator life.
Cantilever — No Ground Track
The cantilever gate runs on top rollers with no ground track, so there is nothing to jam with dust, gravel, snow or flood water. It is the ideal sliding gate for uneven, dusty or heavy-traffic industrial sites where a track is impractical.
MS / SS / Aluminium Infill
Choose mild-steel, stainless-steel or aluminium infill with vertical pickets, sheet, perforated or mesh panels to your security and aesthetic brief. Every sliding gate is powder-coated or hot-dip galvanized for long outdoor service.
Pan-India Install & AMC
Our service network installs and maintains sliding gates nationwide, with Annual Maintenance Contracts carrying a 4-hour emergency response SLA. One vendor for gate fabrication, motor, installation, spares and service — no middlemen.
Types of Sliding Gates We Manufacture
Six sliding gate configurations covering every entrance and security application. Each is built to order — tell us your opening width, gate weight and site conditions and we engineer the gate and motor to match.
Most Popular
Automatic Sliding Gate
The all-purpose automatic sliding gate on a ground track, driven by a rack-and-pinion sliding gate motor with soft start/stop. Photocells, loop detector and flashing lamp come as standard for safe, hands-free vehicle entry at factory and campus gates.
View details
Trackless
Cantilever Sliding Gate
A cantilever gate that runs on top rollers with no ground track — nothing to jam with dust, gravel or flood water. The ideal trackless sliding gate for uneven or dusty industrial sites, mines, ports and high-traffic logistics yards.
View details
Wide Openings
Telescopic Sliding Gate
A telescopic sliding gate splits into two or three nested leaves that retract together, clearing very wide openings where back-run space is limited. The go-to sliding gate for 20m+ industrial entrances and tight-boundary plots.
View details
Heavy Duty
Industrial Sliding Gate
A heavy-duty industrial sliding gate for factories, warehouses and logistics parks, built with structural-steel frames and a 3-phase operator for continuous high-cycle duty. Pairs with boom barriers and access control at busy commercial entries.
View details
Homes & Villas
Residential Sliding Gate
A quiet, compact residential sliding gate for villas, farmhouses and gated communities, with a 24V DC operator, remote control and decorative MS, SS or aluminium infill. Soft start/stop and obstruction sensing keep family driveways safe.
View details
Economical
Track Sliding Gate
An economical track sliding gate that rolls along a floor-level guide rail with bottom wheels — the most cost-effective sliding gate for level, well-drained openings. Manual or motorised, with photocells and manual release available on request.
View detailsWhere Sliding Gates Are Used
Yadav Entrance Automation sliding gates are deployed across India's industrial, commercial, residential and infrastructure sectors — each with specific span, security and duty-cycle requirements our engineers address at specification stage.
Heavy-duty industrial sliding gates for manufacturing entrances, paired with boom barriers and access control for vehicle flow
Wide cantilever and telescopic sliding gates for high-traffic logistics yards, ports and distribution centres
Automatic sliding gates with RFID and remote control for societies, townships and apartment complexes
Quiet residential sliding gates with 24V DC operators and decorative infill for private driveways and estates
IT parks, offices and showrooms needing fast, secure vehicle entry with safety photocells and loop detectors
Trackless cantilever sliding gates that resist dust, gravel and flood water at harsh outdoor industrial sites
Schools, hospitals and government campuses requiring controlled, monitored vehicle and pedestrian access
Toll plazas, depots and utility sites where wide-span automatic gates secure perimeters and service roads
Full Sliding Gate Specifications
Complete engineering data for the Yadav Entrance Automation automatic sliding gate range. All models are built to order — span, gate weight, motor rating and infill are configured to your opening and site conditions.
| Parameter | Specification |
|---|---|
| Max Span | Up to 12m single leaf / 20m+ telescopic (custom on request) |
| Gate / Motor Rating | 600 kg / 1,000 kg / 1,500 kg / 1,800 kg+ gate weight |
| Drive Mechanism | Hardened rack-and-pinion with anti-derailment guides |
| Operator / Power | 24V DC (residential) or 415V 3-phase (industrial); soft start/stop |
| Track Type | Ground-track or cantilever (trackless) configuration |
| Opening Speed | Approx. 9–18 m/min (gate weight & span dependent) |
| Frame Material | Structural steel / RHS sections — IS 2062 Grade B |
| Infill | MS / SS / aluminium — pickets, sheet, perforated or mesh |
| Control | Remote control + push button; access control / RFID optional |
| Safety Devices | Photocells, loop detector, flashing lamp, manual release, anti-crush sensing |
| Surface Finish | Powder-coated (epoxy primer + topcoat); hot-dip galvanized on request |
| Certifications | ISO 9001:2015; CE-marked operators |
| Warranty | 2 years gate motor & electronics, 5 years structural frame |
Sliding Gate Variant Comparison
| Gate Type | Max Span | Track / Trackless ⭐ Most Popular | Drive / Motor | Best Use |
|---|---|---|---|---|
| Track Sliding Gate | Up to 8m | Ground track | Manual / 600 kg motor | Level openings, budget |
| Residential Sliding Gate | Up to 6m | Ground track | 24V DC, 600 kg | Villas, driveways |
| Automatic Sliding Gate | Up to 12m | Ground track | Rack-and-pinion, 1,000 kg | Factory & campus gates |
| Cantilever Sliding Gate | Up to 12m | Trackless | Rack-and-pinion, 1,500 kg | Uneven / dusty sites |
| Industrial / Telescopic Gate | 20m+ telescopic | Track / trackless | 3-phase, 1,800 kg+ | Wide industrial entries |
Certified to International Standards
Our sliding gate range carries the certifications required by India's largest industrial operators, multinational manufacturers and government procurement bodies.
9001
Quality management certification covering design, manufacture, installation and after-sales service of all sliding gates and operators.
European conformity for gate operators per EU Machinery Directive 2006/42/EC — required by multinational clients and confirming safety compliance.
2062
Structural steel to Indian Standard IS 2062 Grade B for gate frames and cantilever beams — certified load and fatigue performance.
2016
Installation methodology compliant with the National Building Code of India 2016 for perimeter security and safe vehicle access.
in India
100% manufactured at our registered Indian facilities — qualifies for government procurement preference and PSU tenders.
Sliding Gate Design + Quote in 24 Hours
No generic quotes, no run-around.
In-House Manufacturing
Every sliding gate fabricated and assembled under ISO 9001 quality control — no imported products, no middlemen.
Free Site Survey & Civil Drawing
Our engineers survey your opening and supply a full foundation and track civil drawing for your contractor — at no charge.
AMC Available Nationwide
Annual Maintenance Contracts covering all sliding gates and entrance-automation equipment with a 4-hour emergency response SLA.
Choosing sliding gates: what actually decides the specification
A sliding gate is a gate that runs sideways on a track or on a cantilever beam. The right one is decided by the opening and how it is used, not by the catalogue. These are the things worth settling before anyone quotes.
What to measure
- Clear opening width and height — the daylight opening the vehicle or person passes through, not the hole in the wall.
- Headroom above the opening — decides which products are possible at all.
- Side-room, both sides — guides, tracks and motors live here, and it is rarely equal on both sides.
- Power at the position — 230V single-phase or 415V three-phase, 50 Hz.
- Cycles per shift — the most under-specified figure on a typical enquiry.
- Environment — temperature, dust, washdown, coastal air or a hygiene requirement.
The full sliding gates range
- Automatic Sliding Gate — The all-purpose automatic sliding gate on a ground track, driven by a rack-and-pinion sliding gate motor with soft start/stop.
- Cantilever Sliding Gate — A cantilever gate that runs on top rollers with no ground track — nothing to jam with dust, gravel or flood water.
- Telescopic Sliding Gate — A telescopic sliding gate splits into two or three nested leaves that retract together, clearing very wide openings where back-run space is limited.
- Industrial Sliding Gate — A heavy-duty industrial sliding gate for factories, warehouses and logistics parks, built with structural-steel frames and a 3-phase operator for continuous high-cycle duty.
- Residential Sliding Gate — A quiet, compact residential sliding gate for villas, farmhouses and gated communities, with a 24V DC operator, remote control and decorative MS, SS or aluminium infill.
- Track Sliding Gate — An economical track sliding gate that rolls along a floor-level guide rail with bottom wheels — the most cost-effective sliding gate for level, well-drained openings.
Where sliding gates are typically installed
We build sliding gates for factory entrances, warehouse yards and gated campuses.
Sectors we supply
- Warehousing and logistics — distribution centres, 3PL facilities and dispatch docks.
- Cold chain — cold stores, freezer rooms and temperature-controlled dispatch.
- Automotive and engineering — component plants, press shops and assembly lines.
- Pharmaceutical and clean manufacturing — controlled and hygiene-critical areas.
- Infrastructure and construction — plant perimeters, site structures and civil scopes.
- Commercial and institutional — offices, campuses, hospitals and parking facilities.
What drives the cost
We quote per project rather than publishing prices. The figure moves with the clear opening, the gate leaf weight, the run available and the motor duty. Send the measurements above and an engineer returns a drawing and a written quotation. Talk to an engineer →
Standards, materials and what we certify
- ISO 9001 — our quality management system is certified to it.
- CE marking on applicable products — a manufacturer's declaration of conformity, not a quality grade.
- IS 2062 structural steel for fabrication, gates and structures.
- IS 6248 for metal rolling shutters.
- EN 1634 as the reference for fire-resistance testing.
- Make in India and GST registered — relevant to government and PSU procurement.
- 230V single-phase / 415V three-phase, 50 Hz — standard Indian industrial mains.
Reference sources: European Commission, CE marking · Bureau of Indian Standards
From enquiry to handover
- Enquiry. Opening sizes, site location and application. An engineer picks it up.
- Site survey. We measure the clear opening, headroom, side-room and power position.
- Drawing and quotation. Equipment, safety schedule, electrical requirement and a written delivery date.
- Manufacture at Neemrana. Built to the approved drawing and the measured opening.
- Installation and commissioning. Fitted and tested by our own team through full travel with safety devices live.
- Handover, spares and AMC. Operating instructions on site, then service through the nearest team.
Explore the full product range, the sectors we serve, our delivered installations, or the areas we cover.
Sliding Gates — frequently asked questions
Who manufactures sliding gates in India?
Yadav Entrance Automation Pvt. Ltd. manufactures sliding gates in India, at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor. We have been building entrance automation equipment since 2011, with more than 500 installations across over 50 cities. Equipment is made to the measured opening rather than to a catalogue size, then installed and commissioned by our own engineers.
What is a sliding gate?
A sliding gate is a gate that runs sideways on a track or on a cantilever beam. It is specified against the opening it serves and the way that opening is used, so two openings of the same width can need different equipment. We build sliding gates for factory entrances, warehouse yards and gated campuses.
What does a sliding gate cost?
We quote per project rather than publishing a price, because the figure moves with the clear opening, the gate leaf weight, the run available and the motor duty. Send the opening dimensions, the site location and how the opening is used, and an engineer will come back with a drawing and a written quotation. That is faster than a list price that would need revising once the site is measured.
Do you supply sliding gates near me?
We install and service across North and West India, with the plant at Neemrana and teams in Delhi NCR and Gujarat. Installations to date cover more than 50 cities, concentrated in the Delhi-Jaipur corridor, Haryana, Rajasthan and Gujarat. Tell us the site location with your enquiry and we will confirm coverage before quoting.
Can sliding gates be motorised or automated?
Yes, where the product supports it. Motorised operation is specified against the weight being moved and the number of cycles per day, not simply added on. The drive, the control panel and the safety devices are listed on the technical drawing you approve before manufacture, so nothing about the automation is a surprise on site.
What power supply is needed?
Standard Indian industrial mains: 230V single-phase or 415V three-phase at 50 Hz. Which one applies depends on the product, the size of the opening and the duty cycle. The requirement is confirmed on the approved drawing so your electrical contractor can position the supply and isolator before delivery.
What measurements do you need to quote for sliding gates?
Clear opening width and height first — the daylight opening, not the wall opening. Then the headroom above the opening and the free side-room each side. Add the power available at the position, how many openings, and roughly how often each is used in a shift. Those figures let an engineer rule out the wrong products before visiting.
Do you handle installation, or only supply?
We manufacture, install and commission with our own team, and we do not sub-contract installation of our own equipment. How well a unit is fitted to its opening decides how long it lasts, so it is not work we hand off. Handover includes operating instructions on site.
Do you provide service, spares and AMC?
Yes. We supply genuine spares and offer Annual Maintenance Contracts for the equipment we manufacture. On high-cycle equipment maintenance matters more than most buyers expect, because wear tracks cycles rather than calendar age. Tell us the site and the equipment and we will route it to the nearest service team.
Which standards and certifications apply?
Our manufacturing is certified to ISO 9001 and applicable products are CE marked. Structural steelwork commonly references IS 2062 and rolling shutters IS 6248, both published by the Bureau of Indian Standards; fire-resistance testing is commonly referenced to EN 1634. If your specification names a standard, send the clause with the enquiry so it is written into the drawing.
Can you make sliding gates to a non-standard size?
Yes, and most industrial openings are non-standard. Equipment is built to the measured opening rather than to a catalogue size. We take the clear width, clear height, headroom and side-room on site, then confirm the achievable size on the drawing before manufacture begins.
How long does manufacture and delivery take?
It depends on the product and whether the opening is standard or bespoke, and it moves with material availability and the current order book. Rather than quote a general figure that may not hold, we confirm a delivery date in writing with the quotation.
Do you work with contractors, consultants and PSUs?
Yes. We supply end users directly and also work as a vendor to main contractors, PMCs and design consultants. We are GST registered and manufacture under Make in India, which matters for government and PSU procurement. For tendered work we can provide drawings, product data and the compliance documentation the specification calls for.
What safety devices are included?
For powered equipment, typically safety photocells across the opening, a safety edge where applicable, limit switches at both travel ends, and a manual release for use during a power cut. Vehicle equipment can add loop detectors. The exact schedule is listed on the drawing you approve, so check that rather than assuming a standard set.
How do I get a quote for sliding gates?
Use the enquiry form on this page and the details reach our team directly, or call and send a WhatsApp message on +91 95492 20707, or email sales@yadaventranceautomation.com. If you already hold drawings or a specification, say so and an engineer will respond rather than a generic reply.