Warehousing & 3PL
High-throughput docks on distribution and fulfilment floors.
Gurugram · NCR industrial corridor
Dock Leveller Manufacturer in Gurugram
Hydraulic and mechanical dock levellers, shelters and seals for Gurugram's warehouses and fulfilment centres. Built to your dock and truck height, installed and serviced across the NCR belt.
- Since 2011
- ISO 9001
- CE marked
- 500+ installations
A level bridge from dock to trailer, at any truck height
A dock leveller bridges the gap and the height difference between a warehouse floor and a trailer bed, so a forklift drives straight in and out. Matched with a shelter and seal, it keeps the bay weather-tight and the cold chain intact while loading. We build each leveller to the dock, the truck heights it serves and the load it carries, then install and service it locally.
The range, numbered
Six dock products we manufacture
01
02
03
04
05
06
Hydraulic dock leveller
Push-button hydraulic platform and lip for high-frequency docks and heavier loads.
View hydraulic dock levellerMechanical dock leveller
Spring-operated platform for lower-frequency docks where a simple, rugged unit fits.
View mechanical dock levellerEdge-of-dock leveller
Bolt-on unit for a modest height difference where a pit is not practical.
View edge-of-dock levellerDock shelter
Retractable or inflatable shelter that closes the gap around a backed-in trailer.
View dock shelterDock seal
Foam seal that presses to the trailer to keep the bay weather-tight and the cold in.
View dock sealLoading-bay equipment
Bumpers, wheel guides, dock lights and controls that complete the bay.
View loading-bay equipmentSpecify the right one
Hydraulic vs mechanical vs edge-of-dock leveller
Which leveller fits depends on how often you load, how heavy, and whether the dock has a pit. Here is the short version.
| Hydraulic | Mechanical (spring) | Edge-of-dock | |
|---|---|---|---|
| Operation | Push-button | Pull-chain, walk-down | Spring, at the dock face |
| Best for | High-frequency docks, heavier loads | Lower-frequency docks | Modest height difference, no pit |
| Operator effort | Low | Moderate | Low to moderate |
| Mounting | Pit-mounted | Pit-mounted | Bolt-on to the dock face |
| Maintenance | Hydraulic service | Spring service | Minimal |
Why the shortlist ends here
Five reasons warehouses around Gurugram choose Yadav
A plant purchase manager checks four things: do they supply plants like mine, are they close enough to service me, can they build what I need, and will someone answer the phone. Here is how Yadav answers all four.
Get a quote1
Made in-house
Design, fabrication and installation under one roof at Neemrana, so one team owns the leveller from steel to service.
2
Local to your dock
Sales office in Gurugram, works at Neemrana. A surveyor reaches your bay in a short drive, not a week.
3
Built to the dock
Capacity, platform and lip sized to your trucks and load, not a single stock unit forced to fit.
4
Bay as one system
Leveller, shelter and seal supplied and installed together as one weather-tight, cold-chain-tight bay.
5
Here for the AMC
Since 2011, 500+ installations across 50+ cities, with hydraulic service and spares held on the belt.
Where these go to work
Plants we build for around Gurugram
Cold chain
Refrigerated docks that must stay sealed while loading.
Food & beverage
Hygienic loading bays between the plant and the trailer.
Automotive
Inbound and outbound docks across the NCR auto belt.
Manufacturing
Dispatch docks handling raw material and finished goods.
Peer proof, not promises
The plants that already buy from Yadav
Japanese and European plants audit a supplier before they place an order. These are plants in your corridor that cleared us and buy their entrance automation from Neemrana.
DaikinNeemrana
Nippon SteelNeemrana
Saint-GobainBhiwadi
AGC (Asahi Glass)Bawal
AhrestyBawal
TG MindaNeemrana
MusashiBawal
SMCC ConstructionNCR
Recent handovers
Svarn Infratel
Ghiloth
30 motorised rolling shutters, supply to handover in 20 days
Ahresty India
Bawal
Automatic mesh-type rolling shutters
TG Minda
Neemrana
Powder-coated shutters with rubber bottom seal
Victura Technologies
Bawal
Four-panel motorised sliding door
Answers for buyers and specifiers
22 questions plants ask about dock levellers
The real questions people search on Google and ask an AI assistant, answered straight. No pricing games, no jargon.
What does a dock leveller do?
A dock leveller bridges the gap and the height difference between a warehouse floor and a trailer bed, so a forklift can drive straight into the truck and back out safely.
How does a dock leveller work?
The platform rises and a lip extends onto the trailer bed to form a level bridge. Hydraulic units do this on a push button; mechanical units use a spring mechanism released by pull-chain or walk-down.
What is a dock leveller used for?
It is used to load and unload trucks at a raised dock. It absorbs the height difference between the floor and different trailer beds so a forklift crosses the gap safely and quickly.
What is a hydraulic dock leveller?
A hydraulic dock leveller raises the platform and extends the lip with a hydraulic power pack on a push button. It suits high-frequency docks and heavier loads and needs less manual effort than a mechanical unit.
What are the different types of dock levellers?
The main types are hydraulic, mechanical (spring) and edge-of-dock levellers, matched with dock shelters and seals. We build all of these to the dock.
Hydraulic or mechanical dock leveller: which do I need?
Hydraulic suits high-frequency docks and heavier loads with push-button operation. Mechanical is a simpler, rugged unit for lower-frequency docks. We recommend the fit after a quick survey of your dock and traffic.
What is the difference between a dock leveller and a dock lift?
A dock leveller bridges a small height difference at a raised dock. A dock lift is a powered platform that raises a load through a larger height, used where there is no raised dock at all.
What is the difference between a pit leveller and an edge-of-dock leveller?
A pit leveller sits in a recess built into the dock and handles a larger height range. An edge-of-dock leveller bolts to the dock face for a modest height difference where a pit is not practical.
What capacity and load can a dock leveller handle?
Capacity is built to the load. Rated capacity, platform size and lip reach are set to order and confirmed on the quote, not quoted as a single headline number. Send the heaviest loaded truck you receive.
What is the standard size of a dock leveller?
There is no single standard size; the platform is built to the dock opening and the trailers you receive. Common platforms are made to order around your bay width and floor level.
What is a dock door?
A dock door is the door at a loading bay, usually a sectional or high-speed door, that closes the opening above the leveller. It pairs with the leveller, shelter and seal to make a weather-tight bay.
What is a dock shelter and a dock seal?
A dock shelter is a retractable or inflatable frame that closes the gap around a backed-in trailer. A dock seal is a foam pad the trailer presses against. Both keep the bay weather-tight and hold the cold chain while loading.
What is the difference between a dock seal and a dock shelter?
A dock seal uses foam pads the trailer compresses, best for consistent trailer sizes. A dock shelter uses a fabric frame that flexes to different trailer sizes. We advise which suits your mix of trucks.
Do I need a shelter and seal with the leveller?
For a weather-tight or refrigerated bay, yes. Leveller, shelter and seal are supplied and installed together, sized to the trailers you receive.
Can you retrofit a dock leveller into an existing dock?
Yes. Pit-mounted and edge-of-dock options cover most existing docks. We confirm the right approach from the pit and floor level on survey.
How long does dock leveller installation take?
A single leveller is typically installed in a day or two once the pit or dock face is ready. Multi-bay orders are scheduled after the survey.
How do mechanical dock levellers work?
A mechanical leveller uses a spring mechanism. The operator releases it with a pull-chain and walks the platform down onto the trailer; a spring returns it when the truck leaves.
Do you manufacture dock levellers in-house?
Yes. Design, fabrication and installation are handled in-house at Neemrana, so one team is accountable and the build is not at the mercy of a trader.
Are your dock levellers built to Indian standards?
Yadav manufactures under an ISO 9001 quality system, from structural steel to IS 2062. Specific certificates for a given build are provided on request.
Do you install and service dock levellers in Gurugram?
Yes. Sales office in Gurugram (Sector 83), manufacturing at Neemrana, and a service team on the same NCR belt, so a survey is a short drive and support is local.
Do you offer AMC and dock leveller repair?
Yes. Annual maintenance and repair, including hydraulic service and spares, are handled locally across the NCR belt.
How do I get a quote for a dock leveller?
Send the dock dimensions, the heaviest loaded truck and your traffic, and a Gurugram engineer replies within one business day with a quote and a free site survey. We do not publish list prices because every leveller is built to the dock.
Question not here?
Ask an engineer on WhatsApp
Yadav Entrance Automation is a dock leveller manufacturer and supplier in Gurugram (Gurgaon), building hydraulic and mechanical dock levellers, edge-of-dock units, dock shelters, dock seals and loading-bay equipment. We install and service dock doors across Gurugram, Manesar, Faridabad, Delhi NCR and India, with local AMC and spares. Looking for a dock leveller company, or a dock leveller near you? Send your dock dimensions for a quote.
Get a quote for your dock leveller
Send the opening or dock size, the application and a rough timeline. A Gurugram engineer replies within one business day with a free site survey booked in.
- Free site survey across Gurugram & NCR
- In-house manufacturing, no middleman
- Local AMC and spares after handover
Dock Leveller Manufacturer in Gurugram
A dock leveller is a powered platform that bridges the gap between a dock and a vehicle bed. We manufacture dock levellers at Neemrana on the Delhi-Jaipur NH-48 corridor and install them across Gurugram (Gurgaon) with our own engineers — the same team that surveys the opening also commissions the equipment.
Where we cover around Gurugram (Gurgaon)
- Gurugram (Gurgaon) — Sales & Corporate Office at Sector 83.
- Manesar and Bawal — on the corridor; a branch office is at Bawal.
- Bhiwadi and Neemrana — the works themselves are at Neemrana.
- Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi — covered by the NCR team.
- Plant visits — a straightforward drive from Gurugram; call ahead.
- See all areas we serve or our offices.
Why buyers choose us for dock levellers around Gurugram (Gurgaon)
- Manufacturing since 2011, with 500+ installations across 50+ cities.
- ISO 9001 certified quality management system.
- CE marking on applicable products.
- Make in India — built at our own plant, not imported and rebadged.
- GST registered, with documentation suited to enterprise and PSU procurement.
- Own installation teams — we do not sub-contract fitting of our own equipment.
What to send us for an accurate quote
- Clear opening width and height — the daylight opening, not the wall opening.
- Headroom above the opening and free side-room each side.
- Power available at the position — 230V single-phase or 415V three-phase, 50 Hz.
- How many openings, and roughly how often each is used in a shift.
- Any temperature, fire-rating or hygiene requirement.
- Site location, so we can confirm coverage and schedule a survey.
Reference: applicable products are CE marked (European Commission); Indian Standards are published by the Bureau of Indian Standards.
Buying dock levellers in Gurugram (Gurgaon) — questions we are asked
Who manufactures dock levellers in Gurugram (Gurgaon)?
Yadav Entrance Automation Pvt. Ltd. manufactures dock levellers at our plant at Neemrana, Rajasthan on the Delhi-Jaipur NH-48 corridor, within easy reach of Gurugram (Gurgaon), and installs across Delhi NCR with our own engineers. We have been building entrance automation equipment since 2011.
Do you install dock levellers across Delhi NCR?
Yes. Our NCR and Haryana coverage includes Gurugram (Gurgaon), Manesar, Bhiwadi, Neemrana, Bawal, Faridabad, Noida, Jhajjar, Bahadurgarh and Delhi. A sales and service team is based in Delhi NCR, and the plant sits on the corridor, so survey and installation scheduling is quicker here than for most of our coverage area.
How quickly can someone survey my site?
Sites in Gurugram, Manesar, Bhiwadi, Bawal and along the Delhi-Jaipur corridor are quickest, because both the plant and a service team are close. Ask when you enquire and we will give you an actual date rather than a general lead time.
Do you provide service and AMC in the NCR corridor?
Yes. We supply genuine spares and offer Annual Maintenance Contracts for equipment we manufacture, with a service team covering the NCR and Haryana corridor. On high-cycle equipment, maintenance should follow the cycle count rather than the calendar.
Can I visit the factory from Gurugram?
Yes. The plant is at Neemrana on the Delhi-Jaipur NH-48 corridor, a straightforward drive from Gurugram. Call +91 95492 20707 ahead so a visit can be scheduled and someone is free to show you the shop floor.