⭐ Best Seller
Click to enlarge
Industrial-grade high speed roll-up doors engineered for demanding manufacturing environments. Operating at speeds up to 2.5 m/s, our doors reduce energy loss, increase throughput, and withstand high-cycle operations with minimal maintenance.
| Opening Speed | Up to 2.5 m/s (opening) / 0.8 m/s (closing) |
| Max Width × Height | 10,000 mm × 8,000 mm |
| Wind Load Rating | Up to 120 km/h |
| Operating Temperature | -20°C to +60°C |
Six engineering advantages that make our high speed doors the preferred choice for India's most demanding industrial facilities.
Tested and certified for 500,000 full open-close cycles. Our doors are built for facilities that run 24/7 — automotive paint lines, pharma clean corridors, cold storage docks — without degradation in speed or seal integrity.
Fast 2.5 m/s opening speed dramatically reduces doorway open time, cutting HVAC energy loss by up to 40% in temperature-controlled facilities. The tight PVC curtain seals out dust, insects, and contaminants when closed.
Every door is manufactured to your opening dimensions. Widths from 1,000mm to 10,000mm, heights from 1,500mm to 8,000mm. Standard RAL colours or custom powder coat finish. Stainless steel hardware available for food and pharma environments.
Self-lubricating guide rails, sealed drive unit, and modular PVC panel design mean annual servicing requires only 2–4 man-hours. Replacement panels can be installed in under 30 minutes without specialist tools.
Every installation includes radar-based motion detection, photo-electric bottom edge safety, and emergency break-out capability. Our IP55 control panel includes PLC logic with remote diagnostics via optional GSM module.
Our trained installation teams complete a single door in 6–10 hours. Pre-assembled header box, pre-wired control panel, and self-drilling guide rail anchors eliminate on-site fabrication. Zero structural modification required in most cases.
Complete engineering data for the High Speed Roll-Up Door series. All specifications subject to final design confirmation for custom dimensions.
| Parameter | Specification |
|---|---|
| Opening Speed | Up to 2.5 m/s (adjustable 0.5–2.5 m/s) |
| Closing Speed | 0.5–0.8 m/s (with safety ramp-down) |
| Maximum Door Width | 10,000 mm (single curtain); wider by multi-curtain |
| Maximum Door Height | 8,000 mm |
| Panel / Curtain Material | 2mm reinforced PVC fabric — 650 g/m² density |
| Transparency Option | PVC vision panels up to 30% of curtain area |
| Drive System | 3-phase 0.75 kW AC motor; single-phase option available |
| Control Panel | NEMA-rated / IP55 PLC panel; IP65 on request |
| Power Supply | 415V / 3-phase / 50 Hz (or 230V single-phase) |
| Operating Temperature | -20°C to +60°C ambient |
| Cycle Life (Tested) | 500,000 cycles — TÜV/CE type-tested |
| Wind Load | Up to 120 km/h (Class 4 per EN 12424) |
| Noise Level | < 68 dB at 1m from door (operating) |
| IP Rating | IP55 standard; IP65 available for washdown environments |
| Safety Devices | Radar motion sensor + photo-electric safety edge standard |
| Crash Recovery | Automatic soft-edge rewind — no manual reset required |
| Emergency Operation | Manual chain override + 4-hour battery backup UPS |
| Guide Rail Material | Hot-dip galvanized steel; SS304 option for food/pharma |
| Header Box | Powder-coated steel; fully enclosed motor housing |
| Finish / Color | Standard RAL 7035 / 9002; custom RAL on request |
| Certifications | ISO 9001:2015, CE Marked, EN 13241, EN 12978 |
| Warranty | 2 years motor, 3 years structure, 1 year PVC curtain |
Every component in a Yadav Automation High Speed Door is manufactured to ISO tolerances and available for rapid replacement under our nationwide AMC network.
Powder-coated steel enclosure housing the drive motor, gearbox, and drum roll mechanism. Fully sealed against dust ingress.
2mm wall thickness C-profile rails. Self-lubricating UHMWPE insert slides for frictionless curtain travel. SS304 option for food/pharma.
650 g/m² woven PVC — tear-resistant, UV-stabilized, flame-retardant (DIN 4102). Available in 10+ standard colours with optional vision strips.
Extruded aluminium beam with EPDM rubber sealing strip. Houses the pneumatic/optical safety edge sensor that triggers reverse on contact.
PLC-based panel with variable frequency drive (VFD) for soft-start and speed adjustment. GSM remote diagnostics optional.
Dual-zone radar detects approaching vehicles and pedestrians up to 6m distance. Adjustable sensitivity zones prevent false triggers.
Chain-operated manual override allows door operation during power failure. Accessible from both sides of the installation.
Pre-tensioned torsion spring system ensures controlled closing speed and reduces motor load. Factory-calibrated to door weight.
Retractable nylon wind locks engage at heights above 2m to prevent curtain billowing in cross-winds up to 120 km/h.
Removable steel panel provides direct access to motor, gearbox, and drum without dismantling the header box. Tool-free in standard models.
High speed doors are installed across eight major industrial verticals — each with specific performance requirements our engineering team addresses at specification stage.
Paint booth entry/exit, body shop clean zones, press shops requiring rapid cycle separation
Cleanroom airlock access, controlled environment corridors — GMP compliant, SS304 hardware
Cold storage entries, blast freezer access, -20°C rated PVC curtains with anti-freeze option
Loading dock doors, cross-dock terminals, sortation facility throughput optimization
HACCP zone separation, insect/pest barrier, washdown IP65 rated for daily sanitization
Server room access control, positive pressure corridor maintenance, ESD-safe panel option
Hangar apron access doors, MRO facility bays — high wind load rating for exposed locations
Turbine hall separation, coal handling plant dust barriers, high-temperature environment rated
Choose the right configuration for your facility. All variants share the same drive platform, control system, and safety architecture — only the curtain type and frame differ.
| Feature | Roll-Up ⭐ Most Popular | Fold-Up | Transparent | Clean Room |
|---|---|---|---|---|
| Max Opening Speed | 2.5 m/s | 1.8 m/s | 1.5 m/s | 1.2 m/s |
| Max Width | 10,000 mm | 6,000 mm | 6,000 mm | 3,600 mm |
| Visibility Through Door | Low (optional vision strips) | Medium (slatted) | High (full clear) | Medium (clean PVC) |
| Overhead Space Required | 300–500mm | 50–100mm | 300–400mm | 300–450mm |
| Certifications | ISO 9001, CE, EN 13241 | ISO 9001, CE | ISO 9001, CE | ISO 9001, CE, GMP |
| Best For | Warehouse, Logistics, Automotive | Low-headroom spaces | Security zones, supervision areas | Pharma, Food, Biotech |
| Starting Price (INR) | ₹2.8 Lakh onwards | ₹3.2 Lakh onwards | ₹3.6 Lakh onwards | ₹4.5 Lakh onwards |
| Delivery Lead Time | 3–4 weeks | 4–5 weeks | 4–5 weeks | 5–6 weeks |
* Prices are indicative for standard sizes. Final pricing depends on dimensions, accessories, and site conditions. Request a formal quote →
Our manufacturing facility and product range carry certifications from globally recognised bodies — ensuring compliance with Indian regulations and multinational procurement requirements.
Quality management system certification covering design, manufacture, installation, and after-sales service of all industrial door products.
European conformity marking per EN 13241 (industrial doors). Required by all multinational clients and confirms compliance with EU machinery directive 2006/42/EC.
The harmonized standard for industrial, commercial, and garage doors and gates. Our products meet all performance classes for wind load, water tightness, and air permeability.
National Building Code of India 2016 compliant — required for installations in permitted buildings across all Indian states. Essential for occupancy certificate clearance.
100% manufactured at our registered Indian facilities. Qualifies for government procurement preferences and PSU tender eligibility under DPIIT Make in India guidelines.
Our engineers review every enquiry and provide a detailed quotation with drawings, lead times, and a full bill of materials. No generic price lists. No run-around.
No middlemen. Every door manufactured at our Noida facility under ISO 9001 quality control.
Our engineers visit your facility, measure the opening, and check structural suitability — at no charge.
Comprehensive Annual Maintenance Contracts with guaranteed 4-hour emergency response across India.
Response guaranteed within 24 business hours. Free site survey included.
By submitting, you agree to our privacy policy. We never share your data with third parties.
